Plastics & environment
Sustainability and laboratory consumables
In the past few decades, plastic consumables have found their way into laboratories, making laboratory work safer and more efficient.
Corrected on 7 October 2026
We have revised this 2021 article. We have removed the conclusions drawn from studies on hospitals and single-use technology, the CO₂ figures for recyclates and the statement on the share of reusable items in our range; they cannot be applied to individual items. The information on the CircularLine laboratory bottle has been replaced by its verified bio-based carbon content.

How can the environmental impact of laboratory consumables be assessed?
Only through the use and life cycle of the individual item: raw material, manufacturing, transport, cleaning and disposal. Whether recyclate, reusable or disposable performs better in a given case can only be shown by comparing functionally comparable products with the same system boundaries. Sterility and contamination control set the limit.
In the past few decades, plastic consumables have found their way into laboratories, making laboratory work safer and more efficient.
The products are light and have good breaking strength. They have good resistance to chemical attacks. They come in all shapes and colours. In addition, the products are relatively cheap.
Many plastic laboratory products are supplied sterile and offer a high level of application safety.
With increasing concern for the environment and the desire to avoid waste, however, many laboratory assistants are asking themselves whether the use of plastic consumables is still ecologically justifiable.
Small amounts – hardly any input into the environment
The discussion about plastics arose due to the pictures of littered beaches and waters. But this litter almost exclusively pertains to consumer goods packaging and 97% of it takes place outside of Europe.
In the overall context, only a few plastics are used in the production of laboratory consumables. Only 8.54% of plastic applications in Switzerland are in the medical sector, which also includes pharmaceuticals.[1]
Laboratory waste hardly ever ends up in the environment. The chemical, pharmaceutical and health-care sectors have been operating established waste management systems for years.
Disposable or reusable: a case-by-case question
The environmental impact depends on the specific use and life cycle. Comparisons require functionally comparable products and the same system boundaries. The life cycle of a laboratory item includes raw material and manufacturing as well as transport, cleaning, reprocessing and disposal. Results from studies on other products, facilities or locations cannot be applied to individual items.
A LCA must be made in each individual case. In addition to environmental aspects, logistics aspects, safety aspects and operational options must of course also be taken into account.
End of Life options
The end of life options for disposable items are of great importance. Whenever possible, these should be kept in circulation:
Mechanical recycling
In this process, the products are pre-sorted, shredded, washed, dried, sorted and then extruded into plastic pellets. Degassing takes place during the extrusion process. For many waste streams, this is the end of life option of choice, especially if the groups are less contaminated and as pure as possible.
Chemical recycling
In these new processes, plastics are broken down into their monomers by thermolysis or solvolysis. The monomers serve as building blocks for new plastics. Additives, pollutants, etc. can easily be ruled out with this process. Chemically recycled plastics are identical in structure to new material and can also be used in regulated areas.
Energy recovery
Thermal recycling is recommended for chemically and/or biologically contaminated waste that cannot be recycled.
With this end of life option, the enthalpy in the plastic system can be used and, for example, used for heating purposes (district heating networks). 1 kg of polyethylene has a calorific value of up to 46 MJ/kg and is therefore higher than, for example, coal.
Climate protection and disposable items
Only a LCA can answer whether disposable or reusable items are better for climate protection. Decontamination, cleaning, reprocessing and quality control also belong in the balance.
The same applies to recyclates: how their use affects the climate balance of an item depends on the recycling process, the material and the system boundaries, and can only be quantified on a product-specific basis.
What can Semadeni offer you?
We offer you a wide range of products for your everyday laboratory work, with a very high delivery readiness. Our range includes items designed for repeated use for their intended purpose. Do you have ideas on how disposable items can be replaced by reusable products? Please write to us at the email address given below.
The bottle body of the 500 ml CircularLine laboratory bottle is made of low-density polyethylene (PE-LD) with a bio-based share. The bottle has a GL45 thread and is supplied with a GL45 cap made of polypropylene (PP). The PE-LD raw material used for the bottle body has a bio-based carbon content of 39 %, determined in accordance with ASTM D6866. This means that 39 % of the carbon in this raw material comes from bio-based sources. The figure applies to the raw material of the bottle body; the PP cap is not covered by it.
Furthermore, depending on the volume of waste, we work with you to examine whether clean single-material fractions from your laboratory can be taken back and recycled. Do you have groups in your laboratory that you would like to recycle? Write to Anita Reichebner (Head of Sustainability & New Business, anita.reichebner(at)semadeni.com).
Sources
- [1] Wirtschaftsdaten [economic data] 2020, KUNSTSTOFF.swiss, Aarau, July 2021

