Capability · Design & engineering
Product development & design
Plastic-compatible development and design from our own design office – from idea through 3D CAD and Moldflow simulation to the 3D-printed prototype and handover into toolmaking and series. One contact from Switzerland.

What does product development at Semadeni include?
At Semadeni, product development covers the plastic-compatible design and layout of a part before tooling exists: from your requirements, our design office draws up a specification, selects the suitable plastic and designs the part in 3D CAD so that function, manufacturability and cost-efficiency fit together. Injection-mould-compatible design means accounting for wall thicknesses, draft angles, tolerances and shrinkage behaviour from the outset. With Moldflow fill simulations we secure the tool design; with 3D printing we check geometry and fit on a real sample. The precise part drawings are the basis for production in our own toolmaking shop and the series that follows.
Process
Benefits of Product development & design
Plastic-compatible design
Wall thicknesses, draft angles, tolerances and shrinkage considered from the start – this avoids costly corrections on the tool.
Secured with Moldflow
Fill simulations show, before toolmaking, how the plastic flows and whether the part can be moulded reliably.
Fast prototypes via 3D printing
Concept and function samples directly from the CAD data – geometry and fit can be checked early and cheaply.
Suitable material choice
We determine the suitable plastic based on thermal, mechanical and chemical requirements – product- and application-specifically.
One contact from idea to series
Design, toolmaking and moulding from one source shorten coordination loops and lead times.
Experience from practice
Years of routine in plastic-compatible layout – from the single part to the function-integrated assembly.
What we deliver in engineering
Framework for pre-clarification. The concrete scope is defined per project based on part, material and quantity.
From idea to series part
Requirements & specification
Capture function, application, quantity and constraints and translate them into a specification.
Concept & material choice
Sketch solution approaches, determine the suitable plastic, judge feasibility.
3D design
Injection-mould-compatible design in CAD with tolerances, draft angles and function integration.
Secure & sample
Moldflow simulation and 3D-printed prototype check filling, geometry and fit before the tool.
Handover into toolmaking & series
Released drawings go directly into in-house toolmaking and series production.

Before the tool
Secure with simulation and 3D printing
Before tooling costs arise, we check the design twice: the Moldflow fill simulation shows on screen how the plastic fills the tool; the 3D print delivers a real sample for geometry, fit and function. Changes can thus be incorporated early and cheaply.
- Moldflow fill simulation secures gate and flow path
- Concept and function samples directly from the CAD data
- Fast iteration of several variants up to design freeze
What you use our design office for
- New development of plastic parts from idea to series maturity
- Redesign and optimisation of existing parts for better manufacturability
- Injection-mould-compatible design and design advice for customer projects
- Function integration and layout of complete assemblies
In detail
Scope of services
Plastic-compatible design
In our own design office, we develop and realise your part with 3D CAD. After a thorough assessment and feasibility analysis, we determine the optimum plastic and design the part so that requirements and technical feasibility fit together. The know-how for the right tolerances and draft angles is decisive – precisely because plastic parts shrink after production.
Secure with Moldflow and 3D printing
To ensure quality and efficiency from the start, we use Moldflow fill simulations: they show how the plastic flows and fills the part, so that we ensure optimal mouldability in advance. We visualise your ideas and create, if required, a 3D-printed prototype before a tool exists.
Handover into toolmaking and series
Our precise part drawings serve as the basis for producing the moulding tools or their components in our own toolmaking shop. The released design thus passes seamlessly into series production – from idea to finished product with one contact.
Frequently asked questions about Product development & design
What does Semadeni's design office do?
Our design office develops and designs plastic parts in a plastic-compatible way: from capturing the requirements through material selection and 3D design to securing with Moldflow and 3D printing. We supply the part drawings that serve as the basis for toolmaking and series production – on request, all from one source.
What is a Moldflow analysis and what is it for?
A Moldflow analysis is a fill simulation: it shows on the computer how the molten plastic fills the tool, where weld lines or air inclusions can arise and whether the part can be moulded reliably. This allows gate, wall thicknesses and geometry to be optimised before a tool is built – which lowers risk and cost.
Do you also take on the redesign of existing parts?
Yes. We analyse existing parts for manufacturability, function and cost and rework them in a mould-compatible way – for example to reduce warpage, improve demoulding or integrate functions. Whether a redesign makes sense we clarify based on your part and your quantity.
What data do you need for a design assignment?
Helpful are a description of the function and application, any sketches, samples or existing data, the target quantity as well as details on requirements such as temperature, media contact or standards. The more concrete the information, the more precise the material recommendation and feasibility assessment.
What does a development cost and how long does it take?
Effort and duration depend heavily on complexity, number of variants and maturity – from a short design consultation to a full new development with prototype. We estimate the framework after a first conversation and prepare a per-project quote; flat-rate figures would be unserious.
Continue in the cluster
- CapabilityView
Mould making & tooling
Injection moulds from our own mould shop in Switzerland – mould design, Moldflow analysis, sampling as well as mould maintenance and storage. The parts that come out of the finished mould are produced next door in our own injection plant.
- ProcessView
Injection moulding
Injection-moulded parts in series from our own plant in Switzerland – clamping forces from 22 to 180 t, an ISO 7 cleanroom, technical and food-grade thermoplastics. As contract moulding on your tool, or on a tool from our own mould shop.
- SolutionView
Industry & manufacturing
Plastic solutions for industry, mechanical engineering and trade: spill pallets, containers, cut-to-size semi-finished products and special constructions in PP, PE, PVC-U and other technical thermoplastics – custom manufacturing to drawing from batch size one, from Swiss production in Ostermundigen.
From idea to product – talk to our design office
Describe your requirement, send a sketch, sample or specification. We assess feasibility, recommend material and design and accompany your part into series – personally from Switzerland.