Service · Quality & testing
Quality assurance & material testing
Semadeni tests plastic parts and products in its own laboratory – to the standards your application calls for. Incoming inspection, dimensional control, material identification and long-term tests are part of the service.

What quality assurance and testing services does Semadeni offer?
At Semadeni, quality assurance is assigned to injection moulding production, where it covers all inspection and control steps that ensure reproducible part quality – from incoming inspection through in-line checks in production to final acceptance. Our in-house plastics laboratory has equipment for tactile and optical dimensional control, material identification, visual and surface assessment as well as long-term tests on resistance and ageing. What is certified is Semadeni AG as a company – to ISO 9001 and ISO 14001, and for regulated applications additionally to EN ISO 13485, ISO 22000 and ISO/TS 22002-4. Which of these standards applies to an order depends on your requirement; each certificate has its own scope, and its wording governs. Across the entire production process we secure batch traceability and document results to customer requirements. Which tests a part needs depends on its function, tolerances and required evidence – we define the scope of inspection together with you, rather than testing on a blanket basis.
Process
Benefits of Quality assurance & material testing
In-house plastics laboratory
Testing equipment for dimensions, material identification and surface assessment in-house – short paths between manufacturing and inspection.
Standards to suit the requirement
What is certified is Semadeni AG, not a single area: ISO 9001, ISO 14001, EN ISO 13485, ISO 22000 and ISO/TS 22002-4. Which standard applies to your order depends on your requirement – the scope of the certificate concerned governs.
Tactile & optical dimensional control
Dimensions and form accuracy checked tactilely and optically – for functional and assembly parts with tight tolerances.
Material identification
Identification and plausibility check of plastics; further material testing on request.
Long-term & resistance tests
Tests on resistance and ageing to assess behaviour under service conditions.
Continuous traceability
Batch traceability across the entire production process and documentation to customer requirements.
Inspection and control scope
Framework for pre-clarification. The concrete scope of inspection is defined according to the function, tolerances and required evidence of your part.
From planning to acceptance
Inspection plan
Define inspection characteristics, tolerances and evidence together with the customer.
Incoming inspection
Check incoming material and bought-in parts for specification and dimensions.
In-process control
In-line checks and visual inspection during production.
Final acceptance & documentation
Acceptance, batch traceability and inspection documentation as needed.
What we test for
- Incoming inspection of incoming material and bought-in parts
- Dimensional checks of moulded parts
- Surface and visual assessment for visible and functional parts
- Documentation and traceability for regulated industries
In detail
Quality that is documented
Reproducible part quality does not arise only at final acceptance, but across the whole process chain. For injection moulding production, Semadeni tests in its own plastics laboratory, from goods receipt through production to delivery – to the requirements of the standards Semadeni AG is certified to. Deviations are thus detected early, not on the finished product.
Testing what matters
Scope of inspection by part
Not every part needs every test. Decisive are the function, tolerances and required evidence – we then define the inspection characteristics and scope together with you. Available are tactile and optical dimensional control, material identification, visual and surface assessment as well as long-term tests on resistance and ageing.
Traceable down to the batch
Documentation for regulated industries
Across the entire production process we secure batch traceability and document results to customer requirements. For laboratory, medical and food, this traceability is often mandatory – we deliver the appropriate evidence per product and per application, rather than giving blanket assurances.
Which certification applies depends on the use: ISO 9001 and ISO 14001 cover the whole company, EN ISO 13485 plastic products for medical devices, ISO 22000 and ISO/TS 22002-4 food safety. Each certificate page states the scope in the wording of the certificate – that wording governs, not a summary of ours. It is not equally wide for all standards: ISO 9001 and ISO 14001 cover the whole company, EN ISO 13485 names production and distribution of plastic products for medical devices, ISO 22000 and ISO/TS 22002-4 name production by injection moulding. And a certification does not replace the conformity assessment of your finished product in any case.
Frequently asked questions about Quality assurance & material testing
To which standards is Semadeni certified?
What is certified is Semadeni AG as a company, not a single area: ISO 9001 (quality management), ISO 14001 (environmental management), EN ISO 13485 (medical devices) as well as ISO 22000 and ISO/TS 22002-4 (food safety and food packaging). Each certificate has its own scope – that of ISO 22000 and ISO/TS 22002-4, for instance, names production by injection moulding. Which standard applies to your order, and which evidence your product needs, is clarified per product and per application.
Can Semadeni issue material certificates for plastic semi-finished products?
We pass on the material certificates of the semi-finished product manufacturer. Own material testing is possible on request; we match the scope to your requirement. We do not give a blanket suitability assurance – decisive are the material, the part and the application.
Which dimensional checks does Semadeni carry out?
We check dimensions and form accuracy tactilely and optically – from spot sampling to documented initial sample inspection. The scope of inspection and the tolerances are defined from your drawing and the part function.
Does Semadeni offer incoming inspection for bought-in parts?
Yes. We check incoming material and bought-in parts for specification and dimensions at goods receipt, before they enter production. Deviations are thus detected early, rather than on the finished product – this secures the continuous quality of the series.
Is seamless traceability possible?
We secure batch traceability across the entire production process and document the test results to your requirement. This is particularly relevant for regulated industries such as laboratory, medical and food.
Continue in the cluster
- ProcedureView
Injection moulding
Injection-moulded parts in series from our own plant in Switzerland – clamping forces from 22 to 180 t, an ISO 7 cleanroom, technical and food-grade thermoplastics. As contract moulding on your tool, or on a tool from our own mould shop.
- ServiceView
Mould making & tooling
Injection moulds from our own mould shop in Switzerland – mould design, Moldflow analysis, sampling as well as mould maintenance and storage. The parts that come out of the finished mould are produced next door in our own injection plant.
- EvidenceView
Certifications of Semadeni AG
- SolutionView
Laboratory & diagnostics
Laboratory consumables, sample vessels and custom parts in plastic for the laboratory, life science and pharma: tubes and racks, liquid handling, filtration, cell culture – chemical-resistant, sterilisable and over 8,000 articles from stock. Swiss development and production in Ostermundigen.
Need a test or evidence?
Describe the part, the characteristics to be tested and the required evidence – we define the scope of inspection, test in our own laboratory and document the results. Personal advice from Ostermundigen and Vienna.